I have 2 ESXi 3.5 hosts and APC SmartUPS RT 6000 and i was following the steps in Joseph Holland guide to make VIMA shut down my VM's i case of power failure.So the problem is that when i came to start the apcupsd daemon, VIMA couldn't connect with the UPS. The apcupsd.conf file is same as the guide, then i set up apcupsd on a windows machine and it worked without any issue. So my guess is the problem is somewhere inside the VIMA. i'm not very experienced with VIMA, so if any of could gave me i tip how to work this out i'll be very thankful.
My apcups.conf file is attached.
Thanks in advance